1. Check to determine whether the lamp pole model is correct (such as single-ended, double-ended) in the installed position, and match the corresponding length and short arm; cut the appropriate wire to the corresponding position, generally reserve 150MM at each end of the stripping wire.
2. Install the jumping arm and lamp head, determine the position and level of the lamp, and take the lamp pole as the benchmark.
3. After wiring, check whether the light wire is fastened firmly.
Ruori Sunshine Lighting|Assembly Method of Solar Street Light Pole
4. Connect the light source and threading, connect the wires correctly according to the instructions, pay attention to the positive and negative poles.
5. After connecting the line, check whether the connection is firm. During the installation of the light source, pay attention that the light projection surface of the light source should be perpendicular to the ground, not the mounting arm surface.
6.After connecting the light source, first use a multimeter to test its resistance and whether it is grounded with the rod body, and then use the battery to test the lighting to confirm that the connection is correct.
Post time: Jul-11-2022